Fusion | Clear Tough Coat

Perfect for those high traffic surfaces such as table tops, our non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth and dries to a matte/gloss finish.

How to use

Shake gently before use. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.

Be sure to gently mix your Tough Coat™ prior to using it as the matting agent and other ingredients may settle to the bottom.
Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied.

Good to know

500ml covers about 75 sq.ft (7m2). Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.

NOTE

Fusion Tough Coat may appear milky when applied over dark Fusion Mineral Paint colours, such as Coal Black, Ash, Chocolate and Midnight Blue. We recommend using Fusion Beeswax Finish instead of Fusion Tough Coat for top coating dark colours.